I 2 Of 5 Set Length 2 - Datalogic PowerScan 950X Series Instruction Manual

I 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in
the second fixed length if in
code's check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 9
instructions on setting this feature.
Table 9. I 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT I 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
5
Appendix D, Keypad
6 Scan ENTER/EXIT PROGRAMMING MODE
$CI2L2
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
provides examples for setting Length 2. See
EXAMPLES
Ignore This
Length
00
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Variable Length
Fixed Length Mode. The length includes the bar
4 Characters 14 Characters
04
'0' and '4' '1' and '4'
~
I 2 of 5 Length Con-
Mode, or
page 282 for detailed
50 Characters
14 50
'5' AND '0'
CANCEL
127