Qr Code Set Length 1; Qr Code Set Length 2 - Datalogic PowerScan 950X Series Instruction Manual

Enter/Exit Programming Mode

QR Code Set Length 1

Specifies one of the bar code lengths for
is the minimum label length if in
length if in Fixed Length Mode. Characters can be set from 0001 to 7,089
characters in increments of 0001 (pad with zeroes).
See page 281
Select QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

QR Code Set Length 2

This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in Variable Length Mode, or the
second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See page 282
$CQRL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
DEFAULT
196
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
for detailed instructions on setting this feature.
Length 2 is 7,089 Characters
QR Code Length
Variable Length Mode, or the first fixed
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
CANCEL
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
PowerScan™ PD953X/PBT950X/PM950X
2D Global Features
Control. Length 1
repre-
QR Code Length Con-
repre-