Enter/Exit Programming Mode
Bluetooth Security Mode
This feature enables/disables authentication and encryption of the Blue-
tooth link. Use the feature
length and digits in the PIN code used to authenticate the Bluetooth Link.
DEFAULT
$CBTSE01(CR)
Bluetooth Security Mode = Enable
Bluetooth PIN Code
After enabling Security Mode (see
specify whether you want to set a 4-digit or a 16-digit PIN Code.
page 304
Select PIN Code Length
$CBTPS00\r
Select 4-character Bluetooth PIN Code
224
"Bluetooth PIN Code"
Changing the security mode setting will unlink the devices. If the Automatic
Configuration Update is set to the default "Enabled" setting, the devices must
only be relinked. If the Automatic Configuration Update is set to "Disabled,"
the Security Mode setting must also be updated in the Base Station using
Aladdin. After the Base Station has been updated, the devices must be
relinked.
for detailed information and examples for setting this feature.
on page 224 to specify the
$CBTSE00(CR)
Bluetooth Security Mode = Disable
"Bluetooth Security Mode"
DEFAULT
~$CBTPS01\r
Select 16-character Bluetooth PIN Code
PowerScan™ PD953X/PBT950X/PM950X
on page
224),
See