Table of Contents
Advertisement
Enter/Exit Programming Mode
Standard 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
Control. Length 2 is the maximum label length if in
or the second fixed length if in
code's check and data characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 11
instructions on setting this feature.
Table 11. Standard 2 of 5 Length 2 Setting Examples
STEP
ACTION
Desired Setting (pad with
1
leading zeroes)
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
$CS2L2
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
132
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Variable Length
Fixed Length
Mode. Length includes the bar
07 Characters
15 Characters
'0' and '7'
'1' and '5'
~
CANCEL
PowerScan™ PD953X/PBT950X/PM950X
Standard 2 of 5 Length
Mode,
page 282
for detailed
50 Characters
'5' AND '0'
Advertisement
Table of Contents
