Motionless Timeout - Datalogic PowerScan 950X Series Instruction Manual

Enter/Exit Programming Mode

Motionless Timeout

Specifies the waiting time in 100 millisecond ticks to assume that the reader
is in a motionless condition. The selectable range is 500 msec to 25.5 Sec-
onds. When no motion event is detected for a period of time longer than this
timeout, the software assumes the reader is in a motionless condition. This
option relates to such features as Aimer On and Stand Mode Object Sense
scanning with respect to motion. See
References.
Select Motionless Timeout Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
DEFAULT
204
"Motionless Timeout" on page 301
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by three digits from the Alpha-
numeric characters in
resenting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
020 = Motionless Timeout = 2 seconds
Appendix D, Keypad
~
CANCEL
PowerScan™ PD953X/PBT950X/PM950X
in
rep-