Power Off; Powerdown Timeout - Datalogic PowerScan 950X Series Instruction Manual

Enter/Exit Programming Mode

Power Off

See "Power Off" on page 19.

Powerdown Timeout

The Powerdown Timeout feature sets the time for automatically switching
the unit off when the imager has been idle.
$CSLPS01(CR)
Powerdown Timeout = 10 minutes
R)$CSLPS03(CR
)
Powerdown Timeout = 30 minutes
$CSLPS0C(CR)
Powerdown Timeout = 120 Minutes (2 Hours)
222
for information about this feature.
$CSLPS00(CR)
Powerdown Timeout = Disable
$CSLPS02(CR)
Powerdown Timeout = 20 minutes
DEFAULT DEFAULT
$CSLPS06(CR)
Powerdown Timeout = 60 Minutes (1 Hour)
PowerScan™ PD953X/PBT950X/PM950X