Good Read Beep Type; Good Read Beep Frequency - Datalogic PowerScan 950X Series Instruction Manual

Enter/Exit Programming Mode

Good Read Beep Type

Specifies whether the good read beep has a mono or bitonal beep sound.
DEFAULT
Good Read Beep Type = Bitonal

Good Read Beep Frequency

Adjusts the good read beep to sound at a selectable low, medium or high
frequency, selectable from the list below. (Controls the beeper's pitch/tone.)
Good Read Beep Frequency = Medium
DEFAULT
66
Good Read Beep Type = Mono
Good Read Beep Frequency = Low
Good Read Beep Frequency = High
PowerScan™ PD953X/PBT950X/PM950X