Configure Actions For F3 (16-Key Models Only) - Datalogic PowerScan 950X Series Instruction Manual

$CPWET
Configure Actions for F2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
FUNCTION KEYS CONFIGURATION (16-KEY MODELS ONLY)
Function Keys F3 through F5 are available on 16-key models only. For more
16-key programming, see
page 258.

Configure Actions for F3 (16-key models only)

DEFAULT
$CPWEU
Configure Actions for F3
Product Reference Guide
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
for the Function Key you want to program. Next scan
4 digits from the Alphanumeric characters in
dix D, Keypad
.
The first digit must be 0; the following 3 digits must
be configured according to the CMD_ID numbers in
Table 27 on page 251
ENTER/EXIT bar code again.
~
"Additional Features for 16-key models"
$CPWEU0000\r
F3 No Actions Configured
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
for the Function Key you want to program. Next scan
4 digits from the Alphanumeric characters in
dix D, Keypad
.
The first digit must be 0; the following 3 digits must
be configured according to the CMD_ID numbers in
Table 27 on page 251
ENTER/EXIT bar code again.
Appen-
. End by scanning the
CANCEL
on
Appen-
. End by scanning the
253