Set Pin Code - Datalogic PowerScan 950X Series Instruction Manual

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadec-
imal
page 304
$CBTPC
Set 4-character Bluetooth PIN Code
~
CANCEL
DEFAULT
Product Reference Guide
using the ASCII Chart
for detailed information and examples for setting this feature.
31323334 = Default PIN Code is 1234
Enter/Exit Programming Mode
on the inside back cover of this manual.
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the hexadecimal digits from
the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
$CBTP6
Set 16-character Bluetooth PIN Code
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
See
Appendix D,
225