The frequency agility features are not equally supported for all model
speeds. Please refer to the following table:
Table 26. Frequency Agility
433 MHz Model
Compatibile
Normal, low speed
Normal, intermediate speed
Normal, high speed
910 MHz Model
Normal, low speed
Normal, high speed
Product Reference Guide
it is possible to select a fixed channel with a frequency different
from the default; please contact Datalogic Technical Support for
information about this feature.
For the 910 models, the radio range can change depending on the
Frequency Agility parameter value; in particular, at low speed, the
radio range is shorter when a fixed channel is programmed. See
the Radio Range values in
Technical Specifications.
Mode
Frequency hopping
No
Yes
No
No
Yes
Yes
Enter/Exit Programming Mode
"Radio Features"
on page 314 of
Fixed Channel
different from default
No
Yes
No
No
Yes
Yes
237