Set String Terminator - Datalogic PowerScan 950X Series Instruction Manual

Set String Terminator

Sets the terminator of the predefined strings.
$CPWEF
Set String Terminator
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by 32 digits from the Alphanumeric
Appendix D, Keypad.
characters in
The digits must be the hexadecimal ASCII representa-
tion of the desired characters. If less than the
expected string of 16 characters are selected, scan the
ENTER/EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End by
scanning the ENTER/EXIT bar code again.
~
CANCEL
257