Linking to a Bluetooth Adapter in Serial Port Profile (Master) Mode
1. Ensure the PC or terminal can network with Bluetooth devices and that
2. Ensure that a COM port is assigned under Services in the Bluetooth
3. Create a Link label that contains the address of the PC Bluetooth
4. Scan the link label you created in step 3.
Linking to a Bluetooth Adapter in HID mode
1. Install any drivers provided with the Bluetooth adapter.
2. Scan the
3. Use the host computer's Bluetooth manager to "Discover new devices"
4. Use a text editor to see incoming data on the port designated by the
Power Off
Scan the bar code below to shut off power to the handheld until the next
trigger pull
Product Reference Guide
it is powered on.
setup menu.
adapter.
The link label is a Code 128 function 3 label with the following format:
<FN3 char>LnkB<12 character Bluetooth address>
The Bluetooth address can be found under "Properties" within the
Bluetooth setup menu.
Link to PC in HID
and select "Datalogic Scanner." If you receive an error message, it may
be necessary to disable security on the device.
computer's Bluetooth manager.
The Powerscan PBT950X can be set up to require a PIN code when con-
necting. If you want to set up a PIN, or when adding new equipment to a
system that uses a custom security PIN, please see
Code"
starting on page 224 for more information.
. This function only applies to the wireless models.
label below.
Link to PC in HID
PowerOff
Linking the Reader
"Bluetooth PIN
19