Linking The Reader; Link Datalogic Rf Devices To Base; Power Off - Datalogic PowerScan PM9100 Series Quick Reference Manual

Linking the Reader

Linking the Reader

Link Datalogic RF Devices to Base

For RF devices, before configuring the interface it is nec-
essary to link the handheld with the base.
To link the handheld and the base, press the trigger to
wake up the handheld, and mount it on the base. If the
reader was previously linked to another base, you must
first scan the barcode before re-linking to the new
Unlink
base.
Unlink

Power Off

Scan the barcode below to shut off power to the handheld
until the next trigger pull.
PowerOff
10 PowerScan™ PM9100