Table of Contents
Advertisement
Replacing the system board assembly
Procedure
1.
Place the replacement system board assembly on a flat, level work surface.
2.
If removed, install the heatsink blank (Removing and replacing the heatsink blank).
3.
Install the system battery (Removing and replacing the system battery).
4.
Install the FlexibleLOM adapter (Removing and replacing the FlexibleLOM adapter).
5.
Install the mezzanine assembly (Replacing the mezzanine assembly).
6.
Install the front panel/drive cage assembly (Removing and replacing the front panel/drive cage assembly).
7.
Install the storage controller or the NVMe pass-through board (Removing a storage controller or NVMe pass-
through board
8.
If removed, install the internal USB drive.
To locate the internal USB connector, see System board components.
9.
Install the direct connect SATA cable (Removing and replacing the direct connect SATA cable).
10. Install the DIMMs (Removing and replacing a DIMM).
11. If removed from the left DIMM baffle, install the M.2 enablement option on the left DIMM baffle (Replacing the M.2
enablement option).
12. If removed from the right DIMM baffle, install the HPE Smart storage battery (Replacing the HPE Smart Storage
Battery).
13. Install both DIMM baffles (Removing the DIMM baffles).
14. Install all drives and drive blanks (Removing and replacing the drive bay options).
15. Install the access panel.
16. Install the server blade.
17. Power up the server blade.
18. Re-enter the server serial number and product ID (Re-entering the server serial number and product ID).
More information
Power up the server blade
Replacing the access panel
Install the server blade
Re-entering the server serial number and product ID
After you replace the system board, the server blade serial number and the product ID must be configured:
Procedure
1. Access System Utilities. During POST, press F9.
2. On the System Utilities home screen, select System Configuration > BIOS/Platform Configuration (RBSU) >
Advanced Options > Advanced Service Options.
3. Select the Serial Number field and press Enter.
Removal and replacement procedures
82
Advertisement
Table of Contents
