Table of Contents
Advertisement
Accessing a server blade with local KVM
Prerequisites
For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION: Before disconnecting the SUV cable from the connector, always squeeze the release buttons on the
sides of the connector. Failure to do so can result in damage to the equipment.
Procedure
1. Open the serial label pull tab and connect the c-Class Blade SUV Cable to the server blade.
2. Connect the video connector to a monitor.
3. Connect a USB mouse to one USB connector.
4. Connect a USB keyboard to the second USB connector.
Item
1
2
3
4
Accessing local media devices
Prerequisites
Use the following configuration when configuring a server blade or loading software updates and patches from a USB CD/
DVD-ROM.
Use a USB hub when connecting a USB CD-ROM drive to the server blade. The USB connectors on the SUV cable do not
support devices that require a power source greater than 500mA. The USB hub provides additional connections and the
power required to support USB keys or external drives that require more than 500mA at 5V.
Description
Monitor
USB mouse
USB keyboard
c-Class Blade SUV Cable
106
Cabling
Advertisement
Table of Contents
