Removing And Replacing The Flexiblelom Adapter - HPE ProLiant BL460c Gen10 Maintenance And Service Manual

5. Install the access panel.
6. Install the server blade.
7. Power up the server blade.
More information
Power up the server blade
Replacing the access panel
Install the server blade

Removing and replacing the FlexibleLOM adapter

Procedure
1. Power down the server blade.
2. Remove the server blade.
3. Place the server blade on a flat, level work surface.
4. Remove the access panel.
5. Remove the mezzanine assembly.
6. Use the FlexibleLOM handle to remove the FlexibleLOM.
Removal and replacement procedures
62