Removing And Replacing A Storage Controller Or Nvme Pass-Through Board; Removing A Storage Controller Or Nvme Pass-Through Board - HPE ProLiant BL460c Gen10 Maintenance And Service Manual

To replace the component, reverse the removal procedure.
More information
Power down the server blade
Remove the server blade
Removing the access panel
Removing the mezzanine assembly
Removing and replacing a storage controller or NVMe pass-through
board

Removing a storage controller or NVMe pass-through board

The server blade supports either a storage controller or an NVMe pass-through board at a time, not both.
Procedure
1. Power down the server blade.
2. Remove the server blade.
3. Place the server blade on a flat, level work surface.
4. Remove the access panel.
5. Prepare the storage controller or the NVMe pass-through board for removal.
Removal and replacement procedures
63