HPE ProLiant BL460c Gen10 Maintenance And Service Manual page 38

11. Install the rubber stoppers in the new locations to secure the PEM nuts in the M.2 riser.
12. Install the M.2 SSDs on the M.2 riser board.
13. Install the M.2 riser board and the M.2 interposer board on the left DIMM baffle (Installing the M.2 riser board and
M.2 interposer board).
14. Install the left DIMM baffle (Replacing the DIMM baffles).
15. Install the access panel (Replacing the access panel).
16. Install the server blade.
17. Power up the server blade.
38
Removal and replacement procedures