Table of Contents
Advertisement
To replace the component, reverse the removal procedure.
Removing and replacing the system board
Prerequisites
Before you perform this procedure, make sure that you have the components included with the hardware kit.
If persistent memory modules are installed in the system and are encrypted with local key management, do one of the
following:
•
Manually retrieve the persistent memory module passwords from the system (user-generated passwords only)
•
Export a password file to a USB key.
Hewlett Packard Enterprise recommends exporting the password file to a USB key.
For more information, see the Intel Optane persistent memory 100 series for HPE User Guide on the Hewlett Packard
Enterprise website (https://www.hpe.com/info/persistentmemory-docs).
IMPORTANT:
•
Hewlett Packard Enterprise does not support replacing a -002 or -003 system board with a -001 system board.
•
The -003 system board can be used to replace a -001 or -002 system board.
Procedure
1.
Power down the system (Power down the system).
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3.
Remove the system from the rack (Remove the system from the rack).
Removal and replacement procedures
120
Advertisement
Table of Contents
