To replace the NVMe SSD, press the Do Not Remove button to open the release lever. Slide the drive completely into the
drive bay and close the release lever.
More information
NVMe SSD components
Removing and replacing the SFF Flash Adapter option
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the enclosure
unless all device bays are populated with either a component or a blank.
Procedure
1. Power down the server blade.
2. Remove the SFF Flash Adapter.
To replace the component, slide the device into the bay. Press firmly near the left-side adapter ejection handle until the
latching spring engages in the drive bay.
More information
Power down the server blade
Removing and replacing a uFF drive
Procedure
1. Back up all server blade data.
2. Observe the LED status of the drive and determine if it can be removed.
3. Remove the uFF drive.
Removal and replacement procedures
45