Assigning Surround Channels To Buses - Yamaha 02R96 Owner's Manual

Assigning Surround Channels to Buses

You can modify the Surround Channel to Bus assignment.
Use the DISPLAY ACCESS [SETUP] button to locate the Surround Bus Setup
1
page.
2 Use the cursor buttons to select the bus for which you want to change the
surround channel assignment, then use the Parameter wheel or INC/DEC
buttons to select a surround channel.
INIT: These buttons reset the channel assignment to the default setting.
Using the Joystick
Use the LAYER buttons to select the Layers, and use the [SEL] buttons to
1
select the Input Channels.
2 Press the [GRAB] button to grab the current Joystick position, and then use
the Joystick to set the surround pan.
This is used to turn on and off Joystick surround pan control for the currently selected Input
Channel. While Grab is on, the Joystick can be used to set the surround pan position of the
currently selected Input Channel. If the Joystick is set to control effects (i.e., the [EFFECT]
button indicator is lit), the [GRAB] button is disabled.
Assigning Surround Channels to Buses
PAN / SURROUND
DISPLAY
L R
L R
ODD EVEN
LINK GRAB EFFECT
02R96 Version 2—Owner's Manual
87