Sending Input Channels To Aux Sends; Soloing Input Channels; Direct Outs; Pairing Input Channels - Yamaha 02R96 Owner's Manual

90
Chapter 7—Input Channels

Sending Input Channels to Aux Sends

Input Channel signals can be sent to Aux Sends 1–8. See "Setting Aux Send Levels" on
page 99 and "Pre-Fader or Post-Fader Aux Sends" on page 98.

Soloing Input Channels

Input Channels can be soloed. See page 121 for more information.

Direct Outs

Each Input Channel features a Direct Out, which can be patched to the Slot Outputs, Omni
Outs, or the 2TR Digital Outputs. Direct Out signals can be sourced pre-EQ, pre-fader, or
post-fader. See "Patching Direct Outs" on page 70 and "Routing Input Channels" on
page 82 for more information.

Pairing Input Channels

Horizontal or vertical Input Channel partners can be paired for stereo operation. See "Pair-
ing Channels" on page 123 for more information.

Viewing Input Channel Settings

Parameter and fader settings for each Input Channel can be viewed on the View pages. See
"Viewing Channel Parameter Settings" on page 129 and "Viewing Channel Fader Settings"
on page 130 for more information.

Naming Input Channels

Input Channels can be named for easy identification. See "Naming Channels" on page 134
for more information.
02R96 Version 2—Owner's Manual