11 Common Channel Functions; Metering - Yamaha 02R96 Owner's Manual

107
Common Channel Functions

11 Common Channel Functions

Metering

Input Channels, Bus Outs, Aux Sends, the Stereo Out, and the effects processors can be
metered on the various Meter pages, which are located by using the DISPLAY ACCESS
[METER] button.
Input and Output Channel Meter pages also display fader positions numerically. The Peak
Hold function, which applies to all level meters, can be turned on or off on any of the Meter
pages.
Setting the Metering Position
Input and Output Channels can be metered pre-EQ, pre-fader, or post-fader. This setting,
which can be set independently for the Input and Output Channels, can be set on the
Metering Position page shown below, or any of the Input and Output Channel Meter pages.
PRE EQ: Channels are metered pre-EQ.
PRE FADER: Channels are metered pre-fader.
POST FADER: Channels are metered post-fader.
02R96 Version 2—Owner's Manual