Yamaha 02R96 Owner's Manual page 269

REV+CHORUS
One input, two output reverb and chorus effects in parallel.
Parameter Range
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
HI. RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
REV/CHO 0–100%
FREQ. 0.05–40.00 Hz
AM DEPTH 0–100%
PM DEPTH 0–100%
MOD. DLY 0.0–500.0 ms
WAVE Sine, Tri
SYNC OFF/ON
1
NOTE
1.
REV->CHORUS
One input, two output reverb and chorus effects in series.
Parameter Range
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
HI. RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
REV.BAL 0–100%
FREQ. 0.05–40.00 Hz
AM DEPTH 0–100%
PM DEPTH 0–100%
MOD. DLY 0.0–500.0 ms
WAVE Sine, Tri
SYNC OFF/ON
1
NOTE
1.
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb and chorus balance (0% = all reverb, 100% = all chorus)
Modulation speed
Amplitude modulation depth
Pitch modulation depth
Modulation delay time
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb and chorused reverb balance (0% = all chorused reverb,
100% = all reverb)
Modulation speed
Amplitude modulation depth
Pitch modulation depth
Modulation delay time
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
269
Effects Parameters
02R96 Version 2—Owner's Manual