Yamaha 02R96 Owner's Manual page 233

Preferences 3
Use the DISPLAY ACCESS [SETUP] button to locate the Preferences 3 page.
1
2 Use the cursor buttons or Parameter wheel to select the preferences, and
use the INC/DEC buttons or [ENTER] button to set them.
Mix Update Confirmation: When this preference is on, a confirmation message asking
if you want to update the current Automix with the latest edits appears when Automix
recording is stopped.
Auto EQ Edit In: When this preference is on, EQ is automatically punched into Automix
recording when an EQ control is adjusted.
Copy Initial Fader: When this preference is on, when Fader events are copied or moved
on the Automix Event Copy page, the fader value at the specified IN point is copied to the
specified TO point. This eliminates fader position matching problems when no fader event
exists at the specified TO point.
Auto Inc TC Capture: When this preference is on, the Timecode Capture memory is
incremented automatically each time a timecode address is captured on the Automix Event
Edit page (see page 185).
Link Capture & Locate Memory: When this preference is on, the eight Capture mem-
ories on the Automix Event Edit page are linked to the eight Locate memories so that, for
example, edits made to Capture memory #1 are reflected on Locate memory #1, and vice
versa.
Clear Edit Channel after REC: When this preference is on, when using Auto Rec,
channels are automatically unarmed (i.e., [AUTO] buttons are turned off) when Automix
recording stops. When this preference is off, channels remain armed when recording stops.
Timecode Display Relative: When this preference is on, the indicated timecode is off-
set as specified by the OFFSET parameter on the Automix Main page.
Receive Full Frame Message: When this preference is on, MTC full frame messages
are recognized and Automix follows them.
Touch Sense Edit In All: When this preference is on, using the faders' Touch Sense
function enables you to punch in and out all parameters for which the corresponding
OVERWRITE buttons are turned on. When this preference is off, you can punch in and out
only these faders selected in Fader mode.
Show Compact Size: Automix data, except that in the Undo buffer, is compressed while
recording. When this preference is on, the compressed size of the Automix is displayed on
the Automix Main and Memory pages. When this preference is off, the uncompressed size
is displayed.
Automix Store Undo: When this preference is on, Automix Store operations can be
undone by using the Undo function.
Setting Preferences
02R96 Version 2—Owner's Manual
233