Yamaha 02R96 Owner's Manual page 189

SYNC button: This button is used to synchronize the list to the current timecode posi-
tion. When pressed, events closest to the current timecode position are displayed. This
function can be used during Automix playback.
DUPLICATE button: This button is used to duplicate events. Use the Parameter wheel to
select an event, select the DUPLICATE button, and then press [ENTER]. A duplicate event
is inserted below the currently selected event. If there are no events in the list, you can use
this button to insert a new event of the type specified by the Event select buttons.
DELETE button: This button is used to delete events. Use the Parameter wheel to select
an event, select the DELETE button, and then press [ENTER].
SELECTED CH: When this option is on, only events of the currently selected channel are
displayed. All Scene recall and effects library recall events are displayed regardless of this
option. For paired channels, only events of the currently selected channel are displayed.
Event select buttons: These buttons are used to select the type of events to be displayed
in the event list.
Button
SCENE/LIB
Library and Scene recall events
Channel faders (Inputs Channels, Bus Out masters,
FADER
Aux Send masters, Group master levels, and the Ste-
reo Out)
ON
Channel Mutes (ON/OFF)
PAN
Pan
SURR-PAN Surround pan
SURR-LFE Surround LFE
SURR-DIV Surround DIV
SURR-RDIV Surround RDIV
EQ-ON EQ ON/OFF
EQ-FREQ EQ Frequency
EQ-Q EQ Q
EQ-GAIN EQ Gain
AUX
Aux Send 1–8 levels
AUX ON
Aux Send 1–8 mutes
INSERT button: This button is used to insert new events. Use the Event select buttons to
select the type of event that you want to insert. Use the Captured timecode counter to spec-
ify the point at which you want to insert the new event. Select the INSERT button, and then
press [ENTER].
LOCATE button: This button is used to locate events at the Capture memory display
position.
Capture memory display: This displays the captured timecode position. The captured
timecode values can be edited by using the Parameter wheel or the INC/DEC buttons. Press
the [ENTER] button to reset the currently selected digits to "00."
CAPTURE button: This button is used to capture the current timecode position. Up to
eight timecode values can be captured and stored in the eight Capture memories. Use the
cursor buttons to select the Capture memory number, and use the Parameter wheel or the
INC/DEC buttons to select the Capture memories. Capture memories can be selected even
while the CAPTURE, LOCATE, or INSERT button is selected.
If the Auto Inc TC capture preference is on (see page 233), Capture memories increment
automatically each time a timecode position is captured.
If the Link Capture & Locate Memory preference is on (see page 233), the eight Capture
memories are linked to the eight Locate memories so that, for example, edits made to Cap-
ture memory #1 are reflected on Locate memory #1, and vice versa.
Events Listed
189
Event Edit Page
List Format
TIME CODE, CH, SCENE/LIB
TIME CODE, CH, dB, SEC
TIME CODE, CH, ON/OFF
TIME CODE, CH, L-C-R
TIME CODE, CH, SURR
TIME CODE, CH, dB
TIME CODE, CH, DIV
TIME CODE, CH, DIV
TIME CODE, CH, ON/OFF
TIME CODE, CH, BAND/Hz
TIME CODE, CH, BAND/Q
TIME CODE, CH, BAND/dB
TIME CODE, CH, AUX, dB
TIME CODE, CH, AUX, ON/OFF
02R96 Version 2—Owner's Manual