Machine Control - Yamaha 02R96 Owner's Manual

32
Chapter 2—Control Surface & Rear Panel

MACHINE CONTROL

A
MACHINE CONTROL DISPLAY button
This button is used to select the Locate Memory and Machine Configuration pages. See
"Setting the Locate Memories" on page 224 and "Configuring Machines" on page 222
respectively for more information.
B
LOCATE MEMORY 1–8 buttons
Pressing these buttons transmits Locate commands to the target machine (DAW, MMC) in
order to locate the Locate memory points. Their indicators light up momentarily when
they're pressed. See "Using the Locator" on page 224 for more information.
C
SET button
This button is used when specifying the eight Locate points. Its indicator lights up while it's
pressed. See "Using the Locator" on page 224 for more information.
D
REW button
This button starts rewind on the target machine (DAW, MMC). Its indicator lights up while
rewinding is in progress. See "Transport Buttons" on page 223.
E
FF button
This button starts fast forward on the target machine (DAW, MMC). Its indicator lights up
while fast forwarding is in progress. See "Transport Buttons" on page 223.
F
STOP button
This button stops the target machine (DAW, MMC). Its indicator lights up momentarily
when it's pressed. See "Transport Buttons" on page 223.
G
PLAY button
This button starts playback on the target machine (DAW, MMC). Its indicator lights up
while playback is in progress. See "Transport Buttons" on page 223.
H
REC button
This button is used in conjunction with the [PLAY] button to start recording on the target
machine (DAW, MMC). Its indicator lights up while recording is in progress. See "Trans-
port Buttons" on page 223.
02R96 Version 2—Owner's Manual
1
MACHINE CONTROL
LOCATE MEMORY
DISPLAY
2
1 2 3
3
SET 5 6 7
4
REW FF
STOP PLAY REC
6 7 8
4
8
5