Routing Input Channels - Yamaha 02R96 Owner's Manual

82
Chapter 7—Input Channels

Routing Input Channels

Each Input Channel can be routed to the Bus Outs, Stereo Out, or its own Direct Out.
Using the SELECTED CHANNEL ROUTING Controls
Use the LAYER buttons to select the Layers, and use the
1
[SEL] buttons to select the Input Channels.
2 Use the [1–8], [STEREO], and [DIRECT] buttons to route the
currently selected Input Channel.
[1–8]: These buttons route the currently selected Input Channel to the
Bus Outs.
[STEREO]: This button routes the currently selected Input Channel to
the Stereo Out.
DIRECT: This button routes the currently selected Input Channel to its Direct Out.
[FOLLOW PAN]: This determines whether the Input Channel's Pan control setting is
applied to the Bus Outs. When off, the levels of the signals fed to the odd and even Bus Outs
is the same. When on, the levels of the signals fed to the odd and even Bus Outs follows the
Pan control.
In Surround mode, when this button is turned off, the surround pan setting does not affect
signals fed to the Bus Outs. You can enable the surround pan setting when the input source
is monaural, and patch the surround sources or surround effects directly to the Surround
Buses.
Routing Pages
Input Channel routing settings can be viewed and set on the Routing pages. If the Auto
ROUTING Display preference is on, these pages appear automatically when a button in the
SELECTED CHANNEL ROUTING section is pressed. See "Auto ROUTING Display" on
page 230.
Use the SELECTED CHANNEL ROUTING [DISPLAY] button to select the Rout-
1
ing pages.
The Routing parameters for the 56 Input Channels are divided among three pages. The
Input Channel 1–24 Routing page is shown below. The layout of the other two pages is the
same.
2 Use the cursor buttons and Parameter wheel to select the parameters, and
use the [ENTER] button or INC/DEC buttons to set them.
Channels can also be selected by using the LAYER buttons and [SEL] buttons.
ALL STEREO: This button assigns all Input Channels that are currently displayed to the
Stereo Out.
02R96 Version 2—Owner's Manual
ROUTING
DISPLAY
1 2
3 4
5 6
7 8
FOLLOW PAN STEREO DIRECT