Yamaha 02R96 Owner's Manual page 8

Digital mixing console version 2.0
Hide thumbs Also See for 02R96:
Table of Contents

Advertisement

8
Important Information
Remote Control
The Joystick or the controls in the SELECTED CHANNEL section enable you to control Pro
Tools Surround Pan settings.
The USER DEFINED KEYS enable you to switch windows in the included Studio Manager
application software.
Other Functions
A user-assignable layer enables you to assign Channels to Remote layer targets. → page 228
You can also select General DAW (for DAW software that supports the Pro Tools protocol)
or Cubase SX as the target for a Remote layer. → page 219
Yamaha's proprietary Advanced DAW protocol has been added to Nuendo, Cubase SX, and
General DAW. This enables you to control these devices using the 02R96's SELECTED
CHANNEL section. (Controllable functions vary depending on the DAW software and ver-
sion you are using.)
You can now assign any of 174 functions to the USER DEFINED KEYS. → page 238
You can assign the selected channels to a Fader or Mute group using the USER DEFINED
KEYS. → page 238
An Operation Lock function prevents unintentional edits and uses a password to restrict
access to panel operation. → page 235
The Oscillator can output sine wave signals with different frequencies to the L and R chan-
nels and odd and even buses. → page 234
You can set the Auto Direct Out On check box so that if you change a channel's Direct Out
destination, the channel Direct Out will automatically be enabled. → page 231
You can set the Routing ST Pair Link check box so that the routing from paired Channels to
the Stereo Bus is linked. → page 231
This product contains a high intensity lamp that contains a small amount of mercury. Disposal of this material
may be regulated due to environmental considerations. For disposal information in the United States, refer to
the Electronic Industries Alliance web site: www.eiae.org
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
02R96 Version 2—Owner's Manual
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Mixing Console
Model Name : 02R96
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference
that may cause undesired operation.
See user manual instructions if interference to radio reception is sus-
pected.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
(mercury)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

O2r 96 version 2

Table of Contents