19 Remote Control; About The Remote Layer - Yamaha 02R96 Owner's Manual

19 Remote Control

About the Remote Layer

The 02R96's Remote Layer allows you to control external MIDI equipment directly from
the 02R96. The type of device to be controlled (i.e., the target) can be specified for each
Remote Layer. There are six types of target: User Defined, Pro Tools, Nuendo, Cubase SX,
General DAW, and User Assignable Layer. User Defined targets allow you to specify the
MIDI data that will be transmitted when the 24 channel strip faders, Encoders, and [ON]
buttons are operated. These settings are stored in Scenes, for snapshot-style automation.
The Pro Tools, Nuendo, Cubase SX, and General DAW targets have been especially designed
to control Pro Tools, Nuendo, Cubase SX, and other DAW software that uses the Pro Tools
protocol.
The User Assignable Layer target enables you to combine 02R96 channels to create a custom
layer. See page 228 for more information on the User Assignable Layer.
Assigning a Target to the Remote Layer
Targets are assigned to the Remote Layer as follows.
Use the DISPLAY ACCESS [REMOTE] button to locate the Remote 1–4 pages.
1
2 Use the cursor buttons to select the TARGET parameter, use the Parameter
wheel or INC/DEC buttons to select a target, and then press [ENTER].
TARGET: This can be set to NO ASSIGN, USER DEFINED, Pro Tools, Nuendo, Cubase
SX, General DAW, or User Assignable Layer. See page 220 for more information on the User
Defined target. See page 196 for more information on the Pro Tools target. See page 228 for
more information on the User Assignable Layer.
To conrol Nuendo or Cubase SX remotely, make the following settings in addition to the
TARGET parameter.
Select the desired port for the DAW parameter on the MIDI/To Host Setup
3
page (see page 191).
Select an appropriate device in the Device menu of Nuendo or Cubase SX
4
and specify the 02R96 as a controller.
For more information on the necessary settings, refer to the Owner's Manual that came
with Nuendo or Cubase SX.
219
Remote Control
02R96 Version 2—Owner's Manual