Yamaha 02R96 Owner's Manual page 65

Attenuating Cascade Inputs
Cascade Inputs can be attenuated, and the Cascade mode and Cascade source can be spec-
ified on the Cascade In page.
Use the DISPLAY ACCESS [DIO] button to locate the Cascade In page.
1
Use the cursor buttons to select the parameters, and use the Parameter
2
wheel, INC/DEC buttons, or [ENTER] button to set them.
CASCADE MODE: When you want to output the same signals from two 02R96s, turn on
the BI-DIRECTIONAL button. In this case, the Cascade connections are looped. Turn on
the CASCADE MASTER option on the last 02R96 to make it the master console. When the
BI-DIRECTIONAL button is off, the last 02R96 in the cascade is automatically configured
as the master console and it output the final signals.
CASCADE IN FROM: This is used to specify the type of device connected to the CAS-
CADE IN port, either 02R96 or 02R. When a 02R96 or DM2000 is connected to the CAS-
CADE IN port, 02R96 is specified automatically.
CASCADE IN ATTENUATOR: These controls are used to attenuate Cascade Input sig-
nals. The AUX9–AUX12 controls attenuate the corresponding signals only when the 02R96
is cascaded between two Yamaha DM2000 Digital Production Consoles, they have no effect
on the 02R96 itself. You can copy the currently selected setting to all Attenuator parameters
by double-clicking the [ENTER] button.
Turning On & Off Cascade Outputs
Individual Cascade Outputs can be turned on or off as follows.
1 Use the DISPLAY ACCESS [DIO] button to locate the Cascade Out page.
Use the cursor buttons to select the ON/OFF buttons, and use the [ENTER]
2
button to set them.
Cascading Consoles
02R96 Version 2—Owner's Manual
65