Data Entry Section; Parameter Wheel; Cursor Buttons - Yamaha 02R96 Owner's Manual

208
Chapter 18—Pro Tools Remote Layer

Data Entry Section

Parameter Wheel

The Parameter wheel is used for shuttling and scrubbing (see page 215). It's also used for
making fine adjustments to the selected region (see page 215).
[SHUTTLE] & [SCRUB] buttons
These buttons are used to select the Shuttle and Scrub modes. See "Scrub & Shuttle" on page
215 for more information. These buttons are mutually exclusive with the [QUICK
PUNCH] and [LOOP] buttons. Also, the cursor in the window on the computer monitor
disappears.
[ENTER] button
This button works the same as the Enter key on your computer keyboard. Pressing it opens
the New Memory Location dialog box. While a dialog box is open, pressing it performs the
same action as clicking the OK button.
[DEC] (ESC) button
For the most part, this button works the same as the Esc key on your computer keyboard.
While a dialog box is open, pressing it performs the same action as clicking the Cancel but-
ton.
[INC] (CURSOR MODE) button
This button is used to select the following cursor modes: Navigation (see page 214), Zoom
(see page 215), and Select (see page 215).

Cursor buttons

These buttons can be used to navigate the Edit window (see page 214), zoom waveforms
(see page 215), and to make fine adjustments to the selected region (see page 215). Their
exact operation depends on the currently selected cursor mode.
02R96 Version 2—Owner's Manual
DEC
(ESC)
SHUTTLE
SCRUB
ENTER
INC
(CURSOR MODE)