206
Chapter 18—Pro Tools Remote Layer
USER DEFINED KEYS Section
[DISPLAY] (AUTO STATUS) button
This button is used to display the Automation mode settings of all channels. See "Viewing
the Automation Mode" on page 216 for more information.
[1] (MIX/EDIT)
This button is used to toggle between the Mix and Edit windows.
[2] (SUSPEND) button
This button is used to temporarily suspend all automation recording and playback. Its indi-
cator flashes while automation is suspended.
[3] (WRITE), [4] (TOUCH), [5] (LATCH), [6] (READ), [7] (TRIM), [8] (OFF)
buttons
These buttons are used in conjunction with the channel strip [AUTO] buttons to set the
Automation mode of each channel strip. See "Setting the Automation Mode" on page 216
for more information.
[9] (
These buttons are used to swap channel banks 24 channels at a time.
[11] (FADER), [12] (MUTE), [13] (PAN), [14] (SEND), [15] (SEND MUTE),
[16] (PLUG-IN) buttons
These buttons are used to select parameters for automation recording and playback. See
"Arming Parameters for Automation" on page 217 for more information.
02R96 Version 2—Owner's Manual
USER DEFINED KEYS
DISPLAY
(AUTO
1
STATUS)
(MIX/EDIT) (SUSPEND) (WRITE)
9
( BANK) (BANK )
BANK) & [10] (BANK
2
3
4
5
6
(TOUCH)
(LATCH)
(READ)
10
11
12
13
14
(FADER)
(MUTE)
(PAN)
(SEND) (SEND MUTE) (PLUG-IN)
) buttons
7
8
(TRIM)
(OFF)
15
16