Yamaha 02R96 Owner's Manual page 21

D
SOLO buttons
These buttons are used to solo Channels. The [SOLO] button indicators of channels that
are soloed light up. See "Soloing Channels" on page 121 for more information.
E
ON buttons
These buttons are used to mute Input and Output Channels. Their exact operation depends
on the currently selected Layer. The [ON] button indicators of channels that are on light up.
You can also use these buttons along with the AUX SELECT buttons to turn Aux Sends on
and off (Mix Minus) (page 104).
F
Channel faders
These 100 mm touch-sensitive motorized faders are used to set the levels of Input Channels,
Bus Outs, and Aux Sends. Their exact operation depends on the currently selected Fader
mode and Layer. See "Selecting Fader Modes" on page 49 for more information. Faders can
be grouped for simultaneous operation. See "Grouping Input Channel Faders" on page 79
and "Grouping Output Channel Faders" on page 126 for more information.
Faders can also be used to select Input and Output Channels. See "Auto Channel Select &
Touch Sense Select" on page 49 for more information. They can also be used to punch chan-
nels in and out during Automix recording. See "Punching In & Out Individual Parameters"
on page 183 for more information.
AUX SELECT
A
AUX SELECT DISPLAY button
This button is used to select the following pages: Aux Send, Aux Send Pan, and Input Chan-
nel Aux View. See "Aux Sends" on page 98 for more information.
B
AUX 1–8 buttons
These buttons are used to select Aux Sends when sending Input Channel signals to Aux
Sends. The button indicator of the currently selected Aux Send lights up. If the currently
selected Aux Send is paired, the indicator of its partner flashes. See "Aux Sends" on page 98
for more information. These buttons can also be used to pair Aux Sends. See "Pairing Chan-
nels" on page 123 for more information.
Using these buttons along with the channel [ON] buttons enables you to turn Aux Sends on
and off (Mix Minus) (page 104).
Using these buttons along with the LAYER buttons enables you to copy the corresponding
channel levels to the Aux Send levels.
These buttons are also used to turn the Aux Out Solo function on and off when Aux/Solo
Link is turned on (page 121).
1 AUX SELECT
DISPLAY
1 2
AUX AUX AUX
5 6
AUX AUX AUX
2
Control Surface
3 4
AUX
7 8
AUX
02R96 Version 2—Owner's Manual
21