Analog Input Spec; Analog Output Spec - Yamaha 02R96 Owner's Manual

Analog Input Spec

Input PAD GAIN
–60 dB
0
INPUT A/B 1–16
–16 dB
26
–34 dB
INPUT 17–24 —
+10 dB
INSERT IN 1–16 —
2TR IN ANALOG
—
1 [L, R]
2TR IN ANALOG
—
2 [L, R]
1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when the unit
is set to maximum gain. (All faders and level controls are maximum position.)
2. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND).
4. Phone jacks are wired: Tip=OUT, Ring=IN, Sleeve=GND
In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
For 2TR IN ANALOG 2 levels, 0 dBV is referenced to 1.00 Vrms.
All input AD converters (except INSERT I/O 1–16) are 24-bit linear, 128-times oversampling.
+48 V DC (phantom power) is supplied to CH INPUT (1–16) XLR type connectors via individual switches.

Analog Output Spec

Output
STEREO OUT [L, R]
STUDIO MONITOR OUT
[L, R]
C-R MONITOR OUT [L, R]
OMNI OUT 1–8
INSERT OUT 1–16
PHONES
1. The maximum output level of each OMNI OUT can be set internally.
2. XLR-3-32 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND).
4. Phone jacks are wired: Tip=OUT, Ring=IN, Sleeve=GND
5. PHONES stereo phone jack is unbalanced (Tip=LEFT, Ring=RIGHT, Sleeve=GND).
STEREO OUT [L, R], 0 dBV is referenced to 1.00 Vrms.
In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
All output DA converters (except INSERT OUT 1–16) are 24-bit, 128-times oversampling.
Actual Load For Use With
Impedance Nominal
50–600 Ω
3k Ω Mics & 600 Ω
Lines
4K Ω 600 Ω Lines
10K Ω 600 Ω Lines
10K Ω 600 Ω Lines
10K Ω 600 Ω Lines
Actual Source For Use With
Impedance Nominal
600 Ω 10k Ω Lines
150 Ω 600 Ω Lines
150 Ω 10k Ω Lines
150 Ω 10k Ω Lines
150 Ω 10k Ω Lines
600 Ω 10k Ω Lines
8 Ω Phones
100 Ω
40 Ω Phones
Input level
1
Nominal
Sensitivity
–70 dB –60 dB
(0.245 mV) (0.775 mV)
–26 dB –16 dB
(38.8 mV) (0.123 V)
0 dB +10 dB
(775 mV) (2.45 V)
–44 dB –34 dB
(4.89 mV) (15.5 mV)
0 dB +10 dB
(775 mV) (2.45 V)
–6 dB +4 dB
(388 mV) (1.23 V)
+4 dB +4 dB
(1.23 V) (1.23 V)
–10 dBV –10 dBV
(0.316 V) (0.316 V)
Output level
1
GAIN SW
Nominal
before clip
–10 dBV
—
(0.316 V)
+4 dB
—
(1.23 V)
+4 dB
—
(1.23 V)
+4 dB
—
(1.23 V)
+18 dB +4 dB
(default) (1.23 V)
–10 dB
+4 dB
(0.245 V)
+4 dB
—
(1.23 V)
— 4 mW
— 12 mW
Analog Input Spec
Connector
Max.
before clip
A: XLR-3-31 type
–46 dB
2
(3.88 mV)
(Balanced)
B: Phone jack (TRS)
–2 dB
3
(616 mV)
(Balanced)
+24 dB
(12.28 V)
–20 dB
(77.5 mV) Phone jack (TRS)
3
(Balanced)
+24 dB
(12.28 V)
+18 dB
Phone jack (TRS)
(6.16 V)
Phone jack (TRS)
+18 dB
3
(6.16 V)
(Balanced)
+4 dBV Phono
(1.58 V) (Unbalanced)
Connector
Max.
+4 dBV
Phono (Unbalanced)
(1.58 V)
XLR-3-32 type
+18 dB
2
(6.16 V)
(Balanced)
Phone Jack (TRS)
+18 dB
3
(6.16 V)
(Balanced)
Phone Jack (TRS)
+18 dB
3
(6.16 V)
(Balanced)
+18 dB
(6.16 V) Phone Jack (TRS)
3
+4 dB (Balanced)
(1.23 V)
+18 dB
4
Phone Jack (TRS)
(6.16 V)
25 mW Stereo Phone Jack (TRS)
5
75 mW (Unbalanced)
02R96 Version 2—Owner's Manual
297
4