Yamaha 02R96 Owner's Manual page 207

Control Surface Operation with the Pro Tools Remote Layer
MACHINE CONTROL Section
[DISPLAY] (MEM-LOC) button
This button is used to open and close the Memory Locations window.
LOCATE MEMORY [1–8] buttons
These buttons perform the same transport-related functions as the 1–8 number keys on a
Macintosh keyboard. If you set the Numeric keypad Mode in Pro Tools to "Classic" (Setups
menu, Preferences), these buttons can be used to directly locate markers 1–8.
[REW] button
This button rewinds from the current cursor position (it's non-latching).
[FF] button
This button fast forwards from the current cursor position (it's non-latching).
[STOP] button
This button stops playback and recording.
[PLAY] button
This button starts playback from the current cursor position.
[REC] button
This button arms Pro Tools for recording ([REC] button indicator flashing), recording is
started by pressing the [PLAY] button ([REC] button indicator lit continuously).
The MACHINE CONTROL section enables you to control Pro Tools only while the DAW
CONTROL option is turned on either on the Locate Memory page (see page 224) or on the
Machine Configuration page (see page 222), regardless of which layer is currently selected.
MACHINE CONTROL
LOCATE MEMORY
DISPLAY
(MEM-LOC)
1 2
SET 5 6
REW FF
STOP PLAY
3 4
7 8
REC
02R96 Version 2—Owner's Manual
207