Yamaha 02R96 Owner's Manual page 29

H
Joystick
This control can be used for surround panning, normal panning, or parameter control of
the Reverb 5.1 effect. When the [EFFECT] button indicator is lit, the Joystick controls the
Reverb 5.1 effect. See "REVERB 5.1" on page 276 for more information. When the
[EFFECT] button indicator is off and the [GRAB] button indicator is on, the Joystick con-
trols surround panning of the currently selected Input Channel. When the [EFFECT] but-
ton and [GRAB] button indicators are both off, the Joystick can still be used for surround
panning if the Auto Grab preference is on. See "Using Surround Pan" on page 85 for more
information. When the [EFFECT] button indicator is off but the [GRAB] button and
[LINK] button indicators are both on, the Joystick can be used for normal panning in uni-
son with the PAN control. See "Panning Input Channels" on page 83 for more information.
EQUALIZER
1
DISPLAY
EQ ON
4
A
EQUALIZER DISPLAY button
This button is used to select the following pages: Equalizer Edit, Equalizer Library, Input
Channel Attenuator/Shifter, and Output Attenuator.
B
FREQUENCY/Q controls
These are rotary controls and push switches. The push switches are used to select either fre-
quency or Q. The current setting is shown by the FREQUENCY/Q indicators. The rotary
controls are used to set the frequency or Q, as selected by the push switches. See "Using EQ"
on page 111 for more information.
C
EQ GAIN controls
These controls are used to set the gain of each EQ band. See "Using EQ" on page 111 for
more information.
D
EQ ON button
This button is used to turn the EQ of the currently selected channel on and off. Its indicator
lights up when the EQ is on. See "Using EQ" on page 111 for more information.
E
FREQUENCY/Q indicators
These indicators show whether each FREQUENCY/Q control is set to control frequency or
Q. The FREQUENCY indicator lights up when it's set to control frequency; the Q indicator,
when it's set to control Q. See "Using EQ" on page 111 for more information.
F
EQ displays
Normally these displays show the frequency of each band. When the GAIN is adjusted, the
gain value is displayed. When the Q is adjusted, the Q value is displayed. If the gain or Q is
not adjusted for two seconds, the frequency value reappears. See "Using EQ" on page 111
for more information.
2 3
EQUALIZER
LOW LOW MID
FREQUENCY FREQUENCY
Q Q
GAIN
dB
125 1.00
Hz
kHz
5 6
Control Surface
HIGH MID
FREQUENCY FREQUENCY
Q Q
GAIN GAIN
dB dB
4.00 10.0
Hz Hz
kHz kHz
02R96 Version 2—Owner's Manual
29
HIGH
GAIN
dB
Hz
kHz