Channel Strip [Auto] Buttons - Yamaha 02R96 Owner's Manual

174
Chapter 16—Automix
UNDO: This button is used to undo various Automix operations. During each recording
pass, when a new Automix is created, when an Automix is recalled, when an offline edit is
performed, or when the Undo function is used, the current Automix data is copied to the
Undo buffer, from which it can be retrieved by pressing UNDO while Automix is stopped.
The Undo buffer is cleared when the 02R96 is turned off. If you want to save the contents
of the Undo buffer, perform the undo, and then store the Automix (see page 151).
INSERT: The INSERT button inserts the current Scene into the current Automix data. This
is useful when you want to quickly swap out a specified range of the Automix data, such as
a line of dialog. See "Inserting Mix Parameters into Automix" on page 180 for more infor-
mation.
AUTO REC: This button works the same as the REC button except that it remains on when
Automix recording is stopped. It appears highlighted while Auto Record mode is on.
REC: This button is used to engage Record-Ready mode, in which Automix recording starts
automatically as soon as the specified timecode source starts. Unlike the AUTO REC button,
however, it's turned off when recording is stopped. It flashes in Record-Ready mode, and is
highlighted during recording. This button can also be used to engage Automix recording
during playback. To do this, while the PLAY button is highlighted (i.e., during playback),
press the REC button (it flashes in Record-Ready mode). Then press the PLAY button to
start recording.
PLAY: This button is used to start Automix recording and playback when the timecode
source is set to internal. When an external timecode source is selected, while the external
timecode is being received, recording and playback are started, and this button is turned on
automatically. If Automix is stopped by pressing the STOP or ABORT button, recording or
playback can be restarted by pressing this button so long as timecode is still being received.
This button can also be used in conjunction with the REC button to punch in recording
during Automix playback.
STOP: This button is used to stop Automix playback and recording. It appears highlighted
while Automix is stopped.
ABORT: This button is used to abort the current recording and inserting without updating
the existing Automix data.

Channel Strip [AUTO] Buttons

The channel strip [AUTO] buttons are used to arm channels in Record-Ready
mode, and to punch channels in and out during recording.
The [AUTO] button indicators operate as follows:
• Off: Automix playback disabled
• Green: Automix stopped or playing
• Orange: Record-Ready mode
• Red: Recording (even for individual parameters, see page 183)
• Flashing red: Takeover in progress
• Flashing green: indicates that a fader is inactive, for example, when you continue touching
a fader after actual punch out has occurred when using the Takeover Edit Out mode.
02R96 Version 2—Owner's Manual
AUTO