Bus Outs; Patching Bus Outs To Outputs; Routing Input Channels To Bus Outs; Metering Bus Outs - Yamaha 02R96 Owner's Manual

9 Bus Outs

Patching Bus Outs to Outputs

Bus Outs can be patched to the Slot Outputs, Omni Outs, or the 2TR Digital Outputs. See
"Output Patching" on page 68 for more information.

Routing Input Channels to Bus Outs

Input Channels can be routed to the Bus Outs. See "Routing Input Channels" on page 82
for more information.

Metering Bus Outs

Bus Out signal levels can be metered on the Meter pages. See "Metering" on page 107 for
more information.

Monitoring Bus Outs

Bus Outs can be assigned to the CONTROL ROOM [ASSIGN 1] or [ASSIGN 2] button for
monitoring. See "Control Room Monitoring" on page 136 for more information.

Attenuating Bus Outs

Bus Out signals can be attenuated pre-EQ. See "Attenuating Signals" on page 110 for more
information.

EQ'ing Bus Outs

Each Bus Out features 4-band parametric EQ. See "Using EQ" on page 111 for more infor-
mation.

Grouping Master EQs

Bus Out EQs can be grouped with the EQs of other Output Channels. See "Grouping Out-
put Channel EQs" on page 114 for more information.

Bus Out Inserts

Internal effects processors and external signal processors can be patched into the Bus Outs
by using the Inserts. See "Using Inserts" on page 115 for more information.

Compressing Bus Outs

Signal dynamics can be controlled by using the Bus Out Compressors. See "Compressing
Channels" on page 116 for more information.

Grouping Master Compressors

Bus Out Compressors can be grouped with the Compressors of other Output Channels. See
"Grouping Output Channel Compressors" on page 119 for more information.
95
Bus Outs
02R96 Version 2—Owner's Manual