Yamaha 02R96 Owner's Manual page 26

26
Chapter 2—Control Surface & Rear Panel
SELECTED CHANNEL Section
The subsections of the SELECTED CHANNEL section are explained below.
ROUTING
A
ROUTING DISPLAY button
This button is used to select the following pages: Input Channel Routing, Bus to Stereo, and
Bus to Stereo Library. See "Routing Input Channels" on page 82 and "Sending Bus Outs to
the Stereo Out" on page 97 for more information.
B
FOLLOW PAN button
This button determines whether or not the currently selected Input Channel's pan setting,
and Surround pan setting are applied to the Bus Outs. Its indicator lights up when it's
pressed. See "Routing Input Channels" on page 82 for more information.
C
STEREO button
This button is used to route the currently selected Input Channel to the Stereo Out. Its indi-
cator lights up when it's pressed. See "Routing Input Channels" on page 82 for more infor-
mation.
D
DIRECT button
This button is used to route the currently selected Input Channel to its Direct Out. Its indi-
cator lights up when it's pressed. See "Routing Input Channels" on page 82 for more infor-
mation.
E
ROUTING 1–8 buttons
These buttons are used to route the currently selected Input Channel to the Bus Outs. The
button indicators of Bus Outs to which the Input Channel is routed light up. See "Routing
Input Channels" on page 82 for more information.
02R96 Version 2—Owner's Manual
ROUTING
DISPLAY ACCESS
DISPLAY
1 2
3 4
PAN / SURROUND
5 6
DISPLAY
7 8
FOLLOW PAN STEREO DIRECT L
DYNAMICS
DISPLAY
GATE / COMP
GATE ON COMP ON
GATE
COMP
EQUALIZER
LOW
DISPLAY
FREQUENCY FREQUENCY
Q Q
GAIN
dB
125
Hz
kHz
EQ ON
1
DISPLAY
2
FOLLOW PAN
SELECTED CHANNEL
PHASE / DELAY
INSERT
L R
R
ODD EVEN
THRESHOLD RANGE ATTACK
THRESHOLD RATIO ATTACK
LOW MID HIGH MID
FREQUENCY
Q
GAIN GAIN
dB dB
1.00 4.00
Hz Hz
kHz kHz
ROUTING
1 2
5
3 4
5 6
7 8
STEREO DIRECT
3 4
LINK GRAB EFFECT
DECAY HOLD
RELEASE GAIN
HIGH
FREQUENCY
Q
GAIN
dB
10.0
Hz
kHz