Table of Contents
Advertisement
Procedure
1. Power down the system (Power down the system).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3. Remove the system from the rack (Remove the system from the rack).
4. Place the system on a flat, level surface.
5. Remove the access panel (Remove the access panel).
6. Disconnect all cables from the drive backplane.
7. Remove the rear drive cage.
8. Remove the drive backplane.
To replace the component, reverse the removal procedure.
92
Removal and replacement procedures
Advertisement
Table of Contents
