Table of Contents
Advertisement
•
Observe the process for installing an NVDIMM.
•
Review and configure the system settings for NVDIMMs. For more information, see Configuring the
server for NVDIMMs on page 83.
HPE Scalable Persistent Memory (CTO only)
HPE Scalable Persistent Memory is an integrated storage solution that runs at memory speeds with terabyte
capacity unlocking new levels of performance for your business workloads. It provides a complete hardware
and software solution utilizing the following components:
•
DRAM for application performance
•
A tier of flash for persistence
•
A backup power source to move data from DRAM to flash
HPE Scalable Persistent Memory is ideal for enabling in-memory compute with persistence and any workload
that could benefit from low-latency DRAM-level performance. This option is available as HPE Factory
Configure To Order (CTO) SKUs only.
For configuration details for HPE Scalable Persistent Memory, see the HPE Scalable Persistent Memory User
Guide at http://www.hpe.com/info/nvdimm-docs.
For more information about HPE Scalable Persistent Memory, see http://www.hpe.com/info/
persistentmemory.
Controller options
The server supports the following storage controllers:
•
Embedded controllers
Enabled through System Utilities and configured through HPE Smart Storage Administrator (Intelligent
Provisioning)
•
Type-a controllers
Type-a controllers install in the type-a smart array connector.
•
Type-p controllers
Type-p controllers install in a PCIe expansion slot
Installing a storage controller
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
Procedure
1. Power down the server.
2. Remove all power:
Hardware options installation
85
Advertisement
Table of Contents
