Table of Contents
Advertisement
Item
Description
1
Locate
2
uFF drive ejection latch
3
Do not remove LED
4
Drive status LED
5
Adapter ejection release latch and
handle
Status
•
Off—Normal
•
Solid blue—The drive is being identified by a host
application
•
Flashing blue—The drive firmware is being updated or
requires an update
Removes the uFF drive when released
•
Off—OK to remove the drive. Removing the drive does not
cause a logical drive to fail.
•
Solid white—Do not remove the drive. Removing the drive
causes one or more of the logical drives to fail.
•
Off—The drive is not configured by a RAID controller
•
Solid green—The drive is a member of one or more logical
drives
•
Flashing green (4 Hz)—The drive is operating normally and
has activity
•
Flashing green (1 Hz)—The drive is rebuilding or
performing a RAID migration, stripe size migration, capacity
expansion, logical drive extension, or is erasing
•
Flashing amber/green (1 Hz)—The drive is a member of one
or more logical drives that predicts the drive will fail
•
Solid amber—The drive has failed
•
Flashing amber (1 Hz)—The drive is not configured and
predicts the drive will fail
Removes the SFF flash adapter when released
Component identification
161
Advertisement
Table of Contents
