•
Adapter removal from the PCI riser cage
•
Adapter removal from an onboard expansion slot
10. Disconnect the cables from the adapter.
Example
To replace the component, reverse the procedure.
Removing and replacing an expansion board or type -p controller
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause electrostatic
discharge.
CAUTION: To prevent improper cooling and thermal damage, do not operate the system unless all PCIe slots have
either an expansion slot cover or an expansion board installed.
Prerequisites
Before you perform this procedure, make sure that you have the components included with the hardware kit.
Removal and replacement procedures
71