Table of Contents
Advertisement
Procedure
1. Power down the system.
2. Remove the system from the rack.
3. Place the system on a flat, level surface.
4. Identify the battery location (System board components).
5. To remove the system battery from its socket, slightly push the metal tab, and then pry it gently from the socket.
6. To replace the battery, press the battery into the socket.
For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized
service provider.
Removing and replacing drive backplanes
Removing and replacing the front LFF drive cage backplane
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause electrostatic
discharge.
Prerequisites
Before you perform this procedure, make sure that you have the components included with the hardware kit.
Procedure
1. Power down the system (Power down the system).
2. Remove all power:
78
Removal and replacement procedures
Advertisement
Table of Contents
