Configuring input
settings
Learn how to configure the input source and picture in picture (PIP)/picture by picture (PBP)
settings.
Setting main input source
Set up the active input to be used as the main image.
1. Select Menu > Input Switching & PIP > Main Input.
2. To select the active input, press ENTER.
Setting second input source
Select an active input to be used as the picture in picture (PIP)/picture by picture (PBP).
1. Select Menu > Input Switching & PIP > PIP/PBP Input.
2. To select another active input, press ENTER.
Enabling second input source
To activate the picture in picture (PIP)/picture by picture (PBP) setting, switch on this function.
1. Select Menu > Input Switching & PIP > PIP/PBP Enable.
2. To swap, press ENTER.
Swapping main input and second input source
Switch the main input source with second input source.
1. Select Menu > Input Switching & PIP > Swap.
2. To swap, press ENTER.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
58