Configuring Input Settings; Setting Main Input Source; Setting Second Input Source; Enabling Second Input Source - Christie HS Series User Manual

Configuring input
settings
Learn how to configure the input source and picture in picture (PIP)/picture by picture (PBP)
settings.

Setting main input source

Set up the active input to be used as the main image.
1. Select Menu > Input Switching & PIP > Main Input.
2. To select the active input, press ENTER.

Setting second input source

Select an active input to be used as the picture in picture (PIP)/picture by picture (PBP).
1. Select Menu > Input Switching & PIP > PIP/PBP Input.
2. To select another active input, press ENTER.

Enabling second input source

To activate the picture in picture (PIP)/picture by picture (PBP) setting, switch on this function.
1. Select Menu > Input Switching & PIP > PIP/PBP Enable.
2. To swap, press ENTER.

Swapping main input and second input source

Switch the main input source with second input source.
1. Select Menu > Input Switching & PIP > Swap.
2. To swap, press ENTER.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
57