Table of Contents
Advertisement
User Controls
On-screen display menus
The Projector has multilingual on-screen display menus that you can use to make image
adjustments and change a variety of settings.
How to operate
1. To open the OSD menu, press Menu on the Remote Control or Projector Keypad.
2. When OSD is displayed, use the Up and Down arrows to select any item in the main menu.
While making a selection on a particular page, press the Right arrow or Enter key to enter sub
menu.
3. Use the Up and Down arrows to select the desired item and adjust the settings using the Left
and Right arrows.
4. Select the next item to be adjusted in the sub menu and adjust as described above.
5. Press Enter to confirm, and the screen will return to the main menu.
6. To exit, press Menu again.
The OSD menu will close and the projector will automatically save the new settings.
DHD410S User Manual
020-001438-01 Rev. 1 (06-2018)
19
Advertisement
Table of Contents
