Printing On Glossy Paper - Xerox WorkCentre 7120 User Manual

Printing

Printing on Glossy Paper

Glossy paper can be printed from Tray 1, 2, 3, 4, and 5 (Bypass Tray).
To order paper or specialty media, contact your local reseller or go to the Xerox Supplies website for
your printer: www.xerox.com/office/WC7120supplies.
Guidelines
• Do not open sealed packages of glossy paper until you are ready to load them into the printer.
• Store glossy paper flat in the original packaging.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you plan to use and remove the unused portion from the
tray when you are finished printing. Replace the unused portion in the original wrapper and seal
for later use.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam in the printer.
Procedure
1. Load glossy paper in the desired tray.
2. In the printer driver, do one of the following:
• Select Gloss Coating as the paper type.
• Select the tray containing the glossy paper as the paper source.
62 WorkCentre 7120 Multifunction Printer
User Guide