Selecting Fax Options; Setting 2-Sided Faxing; Setting The Fax Resolution; Selecting The Original Type - Xerox WorkCentre 6400SFS User Manual

Selecting Fax Options

This section includes:
•

Setting 2-Sided Faxing

•

Setting the Fax Resolution

•

Selecting the Original Type

• Image Enhancement - Auto Suppression
• Selecting the Starting Rate
• Delay Sending a Fax
Setting 2-Sided Faxing
1. On the control panel, press the Fax button.
2. Select 2-Sided Scanning, and then select an option from the list displayed (1-Sided, 2-Sided, 2-
Sided, Rotate Side 2).
Setting the Fax Resolution
1. On the control panel, press the Fax button.
2. Select Resolution, and then select an option from the list displayed (Standard, Fine, Super Fine).
Selecting the Original Type
1. On the control panel, press the Fax button.
2. Select Original Type, and then select an option from the list displayed (Photo & Text, Photo, Text).

Adjusting Image Quality

Brightness and Sharpness
To adjust the brightness or sharpness of the image:
1. On the control panel, press the Fax button.
2. Select the Image Quality tab.
3. Adjust Lighten/Darken or Sharpness to one of the available levels.
4. Select Save.
Image Enhancement - Auto Suppression
When you are using originals printed on thin paper, images printed on one side of the paper can
sometimes be seen on the other side of the paper.
on page 113
on page 113
on page 113
on page 113
on page 115
on page 115
WorkCentre 6400 Multifunction Printer
Faxing
113
User Guide